Lighting Design and Installation in Belton, Texas
Our owner, James Baker, is a licensed master electrician with over 40 years of hands-on experience in Central Texas homes.
We handle everything from a single light fixture to a full indoor and outdoor lighting design for a new build. All work is done to code, tested before we leave, and backed by our satisfaction guarantee.
- Licensed & Insured
- Upfront Pricing
- Same-Day Service
- Serving Belton Area
Lighting Services We Offer in Bell County, TX
Recessed Lighting Installation
Recessed lighting fits directly into the ceiling. There is no hanging fixture. The light sits flush, and the result is a clean, open look that works in any room.
Most Bell County homes that were built more than 20 years ago do not have recessed lighting. Builder-grade fixtures were standard, and they leave corners dark. Next, when a homeowner renovates or updates a room, recessed lighting is often the first upgrade they request.
We install recessed lights in existing ceilings and in new construction. Also, we use IC-rated fixtures when the light will be near insulation in the ceiling above. We calculate proper spacing so every area of the room gets even light coverage.
Every recessed light we install is compatible with LED bulbs and works with a dimmer switch if you want one. We test each fixture before we leave.
New Construction and Retrofit Installs | IC-Rated and Non-IC Options | LED-Compatible Fixtures | Even Spacing, No Dark Corners
Light Fixture Installation and Replacement
A light fixture sets the tone for a room. The right fixture makes a dining room feel complete. The wrong one makes a space feel dull or outdated.
We install all types of light fixtures: flush mount, semi-flush, pendant lights, chandeliers, vanity strips, and track lighting. We also replace old fixtures that are worn out, damaged, or no longer match the style of the room.
Many homeowners in Belton and Bell County call us after buying a new home or completing a renovation. Builder fixtures are functional but basic. Swapping them for something better is one of the fastest ways to improve how a room looks and feels.
Also, if you want to add a light to a location that has no existing wiring, we can run a new circuit to get power exactly where you need it. We handle the wiring, the box, and the fixture in one visit.
Flush, Semi-Flush, Pendant, and Chandelier Options | Vanity and Bathroom Strip Lighting | New Circuit Wiring When Needed | Same-Day Available
Dimmer Switch and Lighting Control Installation
A dimmer switch lets you control how bright your lights are. You can set a room to full brightness when you need it and lower the light in the evenings. This also saves energy over time.
The most common problem we see in Bell County homes is a mismatch between the dimmer and the LED bulb. Not all dimmers work with all LEDs. When they do not match, the lights flicker or the dimmer makes a buzzing sound. This is not a defective bulb. It is the wrong dimmer for the job.
We select the right dimmer for the right bulb type every time. We install LED-compatible dimmers, smart dimmers that work with voice assistants, and 3-way dimmers for rooms with two switch locations.
Also, if your home has older single-pole switches on rooms you want to dim, we can replace them cleanly without disturbing the wiring behind the wall in most cases.
LED-Compatible Dimmer Selection | Smart Dimmers (Voice Assistant Ready) | 3-Way Dimmer Circuits | No Flicker Guarantee
Outdoor and Landscape Lighting Installation
Power does not stop at your back door. A patio, yard, pathway, garden, or driveway all benefit from proper outdoor lighting. Done right, it makes your property look better and feel safer at night.
We install outdoor lighting systems for homes across Belton and Bell County. This includes low-voltage landscape lighting for paths and garden areas, line-voltage fixtures for walls, posts, and overheads, and decorative options like bistro lighting and pergola fixtures.
All outdoor fixtures must be rated for wet or damp locations. All must also be properly grounded per the National Electrical Code. We use materials built for the Central Texas climate: heat, humidity, and storm conditions year-round.
Many homes near Lake Belton and Stillhouse Hollow Lake call us for this work. Large lots and outdoor living spaces need light in the right spots to work well and look their best.
Low-Voltage Landscape Options | Wall, Post, and Overhead Fixtures | Pergola and Patio Lighting | Weather-Rated Materials for Texas Climate
Security Lighting Installation
A well-lit property is a safer property. Security lighting deters unwanted visitors. It also helps you and your family move safely around the property at night.
We install motion sensor lights, dusk-to-dawn lights, floodlights, and camera-integrated security lights on homes across Belton and Bell County. Next, we place fixtures where they matter most: front doors, garages, driveways, back yards, and side gates.
We also install smart-connected security lights that pair with camera systems from Ring, Nest, and other brands. These require proper wiring to function correctly. A surface-mount camera with a battery is not the same as a hardwired security light with a camera built in.
Military families near Fort Cavazos call us regularly for this work, especially before or during deployment. Security lighting provides coverage when the home is unoccupied for extended periods.
Motion-Activated Fixtures | Dusk-to-Dawn Photocell Lights | Camera-Integrated Options | Garage, Driveway, and Entryway Coverage
Porch, Patio, and Deck Lighting Design
A covered porch, back patio, or deck is one of the best parts of a Central Texas home. The right lighting makes those spaces usable at night and comfortable during warm evenings.
We design and install lighting for outdoor living areas of all sizes. This includes porch ceiling fixtures, post lights, step and rail lighting for decks, overhead bistro lights, and pergola fixtures. Also, if you want a ceiling fan on your covered porch, we can install that in the same visit.
All outdoor lighting in wet or exposed areas must use fixtures rated for those conditions. We select the right fixture type for each location so your lighting holds up through rain, heat, and Texas summer storms.
This work is popular in properties near Lake Belton and Stillhouse Hollow Lake, where outdoor entertaining spaces are large and heavily used. Vacation rental owners in Bell County also call us to upgrade outdoor lighting before listing or re-listing a property.
Porch and Patio Ceiling Fixtures | Deck Step and Rail Lighting | Pergola Overhead Options | Wet-Location Rated for Texas Weather
Ceiling Fan Installation and Replacement
A ceiling fan moves air through a room. In summer, it pushes cool air down and makes the room feel several degrees cooler without running the AC harder. In winter, a reverse setting pulls warm air down from the ceiling.
We install ceiling fans in any room of the home, including bedrooms, living rooms, dining rooms, and covered porches. We also replace old fans that wobble, make noise, or no longer run at the right speed.
One common question we get is whether a ceiling fan can be installed where there is no existing light or wiring in the ceiling. The answer is yes. We run a new circuit, install a fan-rated electrical box, and hang the fan in one visit. A standard light box in the ceiling is not strong enough to support a spinning fan. This is a common mistake that leads to a wobbly fan or a safety issue.
We also install outdoor-rated ceiling fans for covered porches and patios. These fans are built to handle humidity and temperature changes without corroding or seizing up.
Standard and Vaulted Ceiling Install | New Circuit Wiring When Needed | Outdoor-Rated Fans for Covered Porches | Wobble Repair and Fan Replacement
LED Retrofit and Lighting Upgrade
LED bulbs use up to 75% less energy than incandescent bulbs. They also last far longer. This means lower energy bills and fewer burned-out bulbs to replace over time.
Many Bell County homes still use older incandescent or fluorescent bulbs in fixtures that were installed years ago. Switching to LED is simple in most cases, but there is a right way and a wrong way to do it.
The most common problem with LED retrofits is dimmer incompatibility. An old dimmer switch that worked fine with incandescent bulbs may cause LED lights to flicker or buzz. Also, some older fluorescent fixtures need a driver replacement, not just a bulb swap, to work correctly with LEDs.
We handle LED retrofits for recessed can lights, fluorescent tube replacements, under-cabinet LED strips, and outdoor fixtures. We also replace any dimmer switches that are not LED-compatible during the same visit.
Recessed Can LED Retrofits | Fluorescent to LED Conversion | Under-Cabinet LED Strip Install | Compatible Dimmer Replacement Included
New Construction and Remodel Lighting Design
New construction and full room renovations are the best time to get your lighting right. Once the drywall is up, adding new circuits or moving fixtures becomes much harder and more expensive.
We work with homeowners, builders, and contractors across Bell County who need a lighting plan before the build or renovation begins. We calculate proper fixture spacing, lay out circuit loads, and map out the right fixture type for each area of the room.
A kitchen needs different lighting layers than a bedroom. A bathroom needs bright, shadow-free vanity lighting that is different from a living room that benefits from softer, dimmable overhead lighting. We design for how the room will actually be used.
New homes along the I-35 Corridor in Bell County are frequently upgraded with full LED and recessed lighting packages before the first occupants move in. We work with builders on these projects regularly.
Full Room Lighting Layout Plans | Kitchen, Bath, and Bedroom Designs | Builder and Contractor Coordination | Pre-Drywall Rough-In Available
Whole-Home Lighting Assessment and Upgrade Plan
Sometimes the goal is not one room. It is the whole house. A whole-home lighting assessment looks at every room, every fixture, and every outdoor area and gives you a clear picture of what is working and what is not.
We check for code compliance, energy efficiency, fixture condition, outdoor coverage gaps, and areas where lighting is inadequate for the way the space is used. After the assessment, we give you a written plan. It lists every recommendation, what it would cost to fix, and in what order the work should be done.
This service is popular with homeowners who just bought an older home in Belton or Bell County. It is also common before a home sale, when sellers want to know what a home inspector might flag about the lighting.
Vacation rental owners near Lake Belton also use this service before re-listing a property for a new season. Guests notice lighting. A well-lit rental books better and gets better reviews.
Full Interior and Exterior Assessment | Energy Efficiency Rating | Written Upgrade Plan Included | Real Estate and Rental-Ready Reports
Ready to Improve the Lighting in Your Belton Home?
A dark room, a broken fixture, or a security light that stopped working are problems with straightforward solutions. Dr. Watts Electric offers same-day service across Belton and Bell County, TX.
⭐ Rated 4.9/5 by 500+ Bell County Homeowners
How We Handle Lighting Design and Installation
We keep every wiring project organized and predictable. Here is exactly what happens from your first call to the finished job.
Call or Request Service Online
You tell us what you need. A single fixture, a full lighting design, or a security light for the garage. We listen and get you on the schedule.
On-Site Assessment
One of our licensed electricians arrives at your home. We look at the space, check the existing wiring and circuits, and talk through your goals. We do not guess. We look first.
Flat-Rate Quote
We give you a clear price before any work begins. That price does not change when the job is done. No hourly billing. No surprise charges.
Install the Lighting
We schedule the job at a time that works for you. We protect your floors and work areas. We run wiring cleanly and minimize damage to walls and ceilings wherever possible. We clean up completely before we leave.
Test Everything
Every fixture, switch, dimmer, and outdoor light is tested before we pack up. If something is not right, we fix it on the spot. We do not leave until the job is done.
What Changes When You Upgrade Your Lighting
Before: A living room with one central ceiling fixture. The corners are dark. The light is harsh at full brightness. There is no way to adjust it. The outdoor porch has one working light that barely covers the front door.
After: Recessed lighting provides even coverage across the whole ceiling. A dimmer switch lets the family set the right level for every time of day. The outdoor porch has a new overhead fixture, two wall sconces on either side of the door, and a motion sensor floodlight covering the driveway. Every improvement was done in one visit.
This is a common project for us across Belton and Bell County. One call covers multiple needs. One visit handles the whole list.
Lighting Installation Across Bell County, TX
Dr. Watts Electric provides lighting design and installation across the following communities:
Belton TX
Temple TX
Salado TX
Harker Heights TX
Killeen TX
Bell County TX
Why Bell County Homeowners Choose
Dr. Watts for Lighting
Lighting work looks simple from the outside. But done wrong, it creates dim results, flickering fixtures, overloaded circuits, and code violations. Here is why homeowners across Bell County call us.
40 Years of Bell County Lighting Experience
Our owner, James Baker, has been installing and designing lighting for Central Texas homes for over 40 years. We have handled every type of fixture, every type of wiring challenge, and every kind of outdoor installation the Texas climate can throw at a property.
Design First, Not Fixture First
Most electricians install what you point to. We look at the room first. We calculate fixture spacing, check circuit capacity, and recommend the right type of lighting for how the space is actually used. This means you get results that look right and last.
LED-Compatible Every Time
We do not install dimmers or fixtures that will cause problems with LED bulbs. Every lighting installation we complete is fully compatible with modern LED technology from the first day.
Flat-Rate Pricing Before We Start
You know the full price before any work begins. We do not bill by the hour. We do not add charges after the job is complete. The quote you receive is the price you pay.
100% Satisfaction Guarantee
Every lighting installation we complete is backed by our satisfaction guarantee. If the result is not right, we come back and make it right. That is how we have earned the trust of over 500 Bell County homeowners.
Book a Lighting Consultation in Belton, TX
Talk to a licensed electrician about your lighting today. We serve all of Bell County, TX and offer same-day appointments for most requests.
Questions About Lighting Design and
Installation in Belton, TX
How much does recessed lighting installation cost in Belton, TX?
The cost depends on the number of fixtures, whether new wiring is needed, and the type of fixture selected. We give you a flat-rate quote before any work begins. Call us at (254) 939-3534 for a same-day estimate.
Do I need a permit to install recessed lighting in Bell County, TX?
In most cases, adding recessed lighting to an existing circuit does not require a permit. If we are running a new circuit from the panel, a permit may be required. We handle all permit paperwork when it applies.
Can you install recessed lighting in a room with no existing ceiling light?
Yes. We run a new circuit from your electrical panel to the room. We install the correct wiring, a junction box, and your recessed fixtures in one visit.
Why do my LED lights flicker after I installed a dimmer switch?
The dimmer and the LED bulb are not compatible. Older dimmers designed for incandescent bulbs do not work correctly with LED technology. We replace the dimmer with an LED-compatible model and the problem is resolved.
What is the difference between indoor-rated and outdoor-rated lighting fixtures?
Outdoor fixtures must be rated for wet or damp conditions. Indoor fixtures are not weatherproofed and will corrode, fail, or become a safety hazard if used outside. We always select the correct rating for each installation location.
How many recessed lights do I need per room?
A general rule is one recessed light for every 4 to 6 square feet of ceiling space, depending on fixture brightness and ceiling height. We calculate this for your specific room during the initial visit so you get even light coverage without dark corners or harsh bright spots.
How long does a ceiling fan installation take?
A standard ceiling fan replacement takes 1 to 2 hours. If new wiring is needed because there is no existing box in the ceiling, the job typically takes 2 to 4 hours. We give you an accurate time estimate with your flat-rate quote.
Can you install ceiling fans on vaulted ceilings?
Yes. Vaulted ceilings require a downrod and an angled canopy bracket so the fan hangs level. We bring the right hardware for vaulted ceiling installations and confirm the size and style before ordering.
What type of outdoor lighting is best for home security in Bell County?
Motion-activated floodlights are the most effective deterrent. Dusk-to-dawn lights provide consistent coverage all night. Camera-integrated security lights add visual documentation. We recommend the right combination for your property based on entry points and coverage gaps.
How much energy do LED lights save compared to regular bulbs?
LED bulbs use up to 75% less energy than standard incandescent bulbs. They also last up to 25 times longer. In Bell County, where summer energy bills are high, the savings add up quickly. Most homeowners recover the cost of an LED retrofit within the first year.
Do outdoor lights need to be GFCI-protected in Belton, TX?
Yes. The National Electrical Code requires GFCI protection for all outdoor electrical outlets and fixtures in certain locations. Outdoor lighting circuits in areas near water sources must also meet specific code requirements. We install all outdoor lighting to full NEC compliance.
How long does a whole-home lighting upgrade take in Bell County?
This depends on the size of the home and the scope of the project. A typical whole-home lighting assessment takes 1 to 2 hours. A full upgrade covering multiple rooms and outdoor areas may span 1 to 2 days. We provide a clear timeline with your flat-rate quote.