Electrical Panel Upgrade in Belton, Texas
When Your Panel Can’t Keep Up
Your panel may still be working but if it is only 100 amps, it is not keeping up with what your home needs. Most older Belton homes were wired for far less load than they carry now. An EV charger, a new AC system, or a room addition can push a 100-amp panel past its limit. Dr. Watts Electric upgrades panels to 200-amp or 400-amp service across Bell County. We pull the permits, handle the inspection, and give you a flat-rate price before we start.
- Licensed & Insured
- Upfront Pricing
- Same-Day Service
- Serving Belton Area
Panel Upgrade Services in Belton & Bell County, Texas
We handle every type of panel upgrade job. Here is what we offer. Click any service to learn more.
100 to 200-Amp Upgrades
A 100-amp panel is the most common electrical bottleneck in older Belton homes. It was built for a time when homes used far less power than they do now. Today, that same panel is trying to run central AC, a dryer, a range, a water heater, and more all at once. We upgrade your service from 100-amp to 200-amp so your home can handle modern electrical load without tripping breakers. Also, we pull the permit, coordinate with Oncor, and pass the city inspection all included in your flat-rate quote.
200 to 400-Amp Upgrades
Some properties need more than 200-amp service. Large homes with pools, EV chargers, workshop equipment, and whole-home HVAC systems can max out a 200-amp panel fast. We upgrade to 400-amp service for residential and light commercial properties across Bell County. This is also the right upgrade for properties adding an ADU, a barn, or a large detached structure. Also, we handle dual-meter 400-amp setups for multi-unit properties. Your property gets the power it needs now, and for whatever you add later.
EV Charger Panel Upgrades
A Level 2 EV charger needs a dedicated 240-volt circuit and that circuit needs a panel with room to handle it. Most older 100-amp panels in Belton do not have the capacity. We upgrade your panel and add the 240-volt circuit in one visit, so your EV charger is ready to install the same day. Also, we work with all major EV brands Tesla, Ford, GM, Rivian, Hyundai, and others. This means your garage gets a proper charger setup from a licensed electrician, not a workaround that trips your panel at 11 PM.
Home Addition Subpanels
Adding a room, an ADU, or finishing a garage apartment? Every new space adds electrical load. Before the walls go up, you need to know if your panel can handle it. We perform a load calculation first then upgrade your panel or add a subpanel depending on what the project actually needs. Also, we work alongside your contractor to keep the project on track. This means your addition is wired right from day one, with no electrical problems to track down after the drywall is up and the job is done.
Solar-Ready Panel Prep
Planning to add solar panels to your Belton home? Your electrical panel has to be ready for it before your solar installer shows up. Many older panels are not sized or wired for a solar connection. We upgrade your panel for solar readiness including the right conduit, junction prep, and capacity for net metering. Also, if you are adding a battery system like a Powerwall or Enphase battery, we make sure the panel supports it from the start. This saves you from paying for the same electrical work twice.
Generator Panel Upgrades
A whole-home generator needs more than just a transfer switch; it needs a panel that can handle the load when the grid goes down. If your panel is already near capacity, adding generator power on top of it is a problem. We upgrade your panel and install the transfer switch together so your generator can power what your home actually needs. Also, if you are adding a whole-home battery backup system, we size and wire the panel to support it. This means backup power that actually works when you need it.
Subpanel Additions & Setup
Not every capacity problem needs a full main panel upgrade. Sometimes adding a subpanel is the right move especially for garages, workshops, detached structures, pools, and ADUs. A subpanel feeds power from your main panel to a new area with its own breakers and circuits. We size and install subpanels for homes and businesses across Bell County. Also, we can combine a subpanel addition with a main panel upgrade when both are needed at the same time. This means the right solution for your specific property not a one-size-fits-all answer.
Service Entrance Upgrades
The service entrance is where power from the utility company enters your home, the weatherhead, meter base, and the conductors feeding your panel. If these components are too small for your upgrade, the whole job stalls. We replace weatherheads, meter bases, and service entrance conductors as part of your panel upgrade when needed. Also, we coordinate directly with Oncor to make sure the utility side is ready before we do the panel side. This means your upgrade goes start to finish without unexpected delays from the utility company.
Pre-Sale Panel Compliance
Selling your home in Bell County? A flagged electrical panel can kill a deal. Buyers’ inspectors flag undersized panels, panels with no open slots, and panels that are not up to current code. Lenders sometimes require a panel upgrade before they will approve a mortgage on the property. We perform pre-sale panel upgrades fast with a written report you can hand to your realtor, the buyer, and the lender. Also, we document the upgrade for your homeowner’s insurance. This means your home sale moves forward without an electrical issue holding it up.
Need an Electrician?
We’re Available 24/7!
Monday
8:00 am – 5:00 pm
Tuesday
8:00 am – 5:00 pm
Wednessday
8:00 am – 5:00 pm
Thursday
8:00 am – 5:00 pm
Friday
8:00 am – 5:00 pm
Saturday - Sunday
Closed
Electrical Panel Upgrades Across Belton & Bell County, Texas
Our team covers all of Bell County. We do panel upgrades in Temple, Salado, Harker Heights, Killeen, Nolanville, Morgan’s Point Resort, Troy, Florence, and other communities across Central Texas. Not sure if we cover your area? Just call, we will tell you right away and get you on the schedule.
Not sure if we cover your area? Just call us at (254) 939-3534 and we will let you know right away.
Belton TX
Temple TX
Salado TX
Harker Heights TX
Killeen TX
Bell County TX
Frequently Asked Questions
Electrical Panel Upgrade in Belton, TX
How much does a panel upgrade cost in Belton, Texas?
The cost depends on your current panel size, the new service size, whether a service entrance upgrade is needed, and the permit fees for your area. At Dr. Watts, we give you a flat-rate quote before we start so the number we give you is the number you pay. Call (254) 939-3534 to get a quote for your specific home.
Do I really need a panel upgrade, or just a breaker replacement?
Sometimes a tripping breaker just needs to be replaced. Other times, the whole panel is working at its limit and no single breaker fix will solve it. We do a load calculation to find out which situation you are in before we recommend any work. We are not going to quote you a panel upgrade if a breaker fix is all you need.
How long does a panel upgrade take?
Most 100-amp to 200-amp upgrades take one full day. If a service entrance upgrade is also needed, it may run into a second day depending on utility scheduling. We give you a clear timeframe when we quote the job.
Do I need a permit for a panel upgrade in Belton, TX?
Yes. Panel upgrades require a permit in Belton and across Bell County. The work must also pass a city inspection before it is done. Dr. Watts handles all permit paperwork and schedules the inspection for you at no extra hassle on your end.
Do I need a panel upgrade before installing an EV charger?
It depends on your current panel size and how much capacity is already in use. Many older Belton homes with 100-amp panels do need to upgrade before a Level 2 EV charger can be added safely. We check your panel first and if an upgrade is needed, we can do both in the same visit.
What size panel do I need for my Belton home?
Most modern single-family homes in Bell County need 200-amp service at minimum. If you have or plan to add a pool, an EV charger, a large HVAC system, or a workshop, 200-amp may not be enough. We do a full load calculation to give you the right answer for your specific property, not a guess.
Can I upgrade my panel and add a subpanel at the same time?
Yes. We often do both together upgrade the main panel to 200-amp and add a subpanel for a garage or detached structure at the same time. Doing both in one visit saves time and avoids scheduling two separate permits and inspections.
What is a service entrance upgrade and do I need one?
A service entrance upgrade replaces the weatherhead, meter base, and conductors that bring power from the utility pole to your panel. If your current service entrance is rated for 100-amp service, you need to upgrade it at the same time as your panel. We check this when we quote your panel upgrade and include it if it is needed.
Do you handle Oncor coordination for panel upgrades in Belton?
Yes. Panel upgrades in Belton require coordination with Oncor so the utility side of your service is updated to match your new panel capacity. Dr. Watts handles this coordination directly so you do not have to make a separate call to the utility.
Do you offer financing for panel upgrades in Bell County?
Yes. We offer financing for panel upgrades and service entrance work. A 200-amp upgrade is a real cost financing option available so the job does not have to wait. Ask about this when you call for your quote.
Ready to Upgrade Your Panel in Belton?
We Can Start This Week.
If your panel is too small, the problem will not go away on its own. It will get worse, more tripping breakers, more load, more risk. Dr. Watts Electric is based in Belton, licensed in Texas, and we give you a flat-rate price before we touch anything. We pull the permits, coordinate with Oncor, and schedule the inspection. Financing is available so the upgrade does not have to wait.
Call today and we will get you on the schedule.